Ano: 2017 - 2021

Evolution Line Exhaust System

• Flagship of the Akrapovic exhaust systems
• Used and tested by top factory teams in racing
• Each model is unique and dedicated to maximizing engine performance while reducing overall weight for optimized handling of the whole motorcycle

Ano: 2017 - 2021

Titanium Slip-On Line Offroad Muffler

• Oval-shaped can with a titanium outer sleeve
• Outlet cap is made of titanium, while perforated inner sleeve and inlet cap are made of high-quality stainless steel
• Link pipe is made of stainless steel and welded to the muffler
• Link pipe; stock header assembly joint is milled on a state-of-the-art CNC machine and secured by metal clamp and/or high-quality silicon-shielded tempered springs
• Anti-seize lead-free copper paste is used to prevent seizing, corrosion and rusting of bolt and joint of the metal clamp made of stainless steel
• Installed aluminum FIM MX 98 dB noise damper conforms to MX regulations

• Cross Country or Enduro
• An extremely versatile tire that allows perfect grip on mud, sand, gravel, meadow and asphalt
• New optimized tread pattern
• Road-approved
• Tube type (TT)
• R-rated for speeds up to 170 km/h (106 mph)

PARA SE ANTECIPAR EM QUALQUER TERRENO!

- Mais aderência e melhor amortecimento Melhoria significativa na capacidade de salto (especialmente a baixa velocidade), graças ao trabalho realizado na geometria dos tacos e na arquitetura do pneu.

- Maior versatilidade e excepcional aderência em piso molhado. Novos compostos de borracha desenvolvidos especificamente para utilização off-road.

- 15% de melhoria na durabilidade e desempenho claramente mais estável ao longo da vida útil do pneu Compatibilidade melhorada com MICHELIN BibMousse

- Aprovado pela FIM

- Pneu de competição (utilização na estrada apenas em competições)

Quick Shifter Sensor

• Dynojet's Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications
• The shift rod pressure/tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration
• The linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit
• Requires modification of gear-linkage tie-rod
• Mount one end to the shift lever and the other to a fixed point on the chassis
• Plugs directly into the Power Commander expansion port with no re-wiring required
• Power Commander Control Center software lets you set engine dead time during upshifts and minimum rpm for system operation

Xstream Series Motocross High-Flow Air Filter

Kawasaki KX250F 2016 - 2021

Kawasaki KX450F 2016 - 2021

• Take performance to the next level with the addition of a filter within the filter's top in order to add even more filtration area
• Each filter piece has pleated media which creates a large surface area that provides high airflow and great dirt holding capacity for extreme conditions
• The two-piece design eases installation and removal on modern narrow-framed MX bikes

Air Filters

Kawasaki KX250F 2016-2021

Kawasaki KX450F 2016-2021

• Manufactured from world-class materials to achieve optimum performance and engine protection
• Precision engineered to perfectly fit the factory airbox, these filters meet or exceed OEM specifications
• Direct replacement of original equipment filter with no need to change carburetor jets or settings

Power Commander V

• Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
• "Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
• Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
• Build an adjustment table based on analog input such as boost and temperature
• USB powered from computer; 9-volt adapter is no longer needed
• Fuel control for each individual cylinder in a smaller enclosure
• Gear/speed input allows for map adjustment based on gear
• Analog input allows users to install any 0-5 volt sensor
• Two-position map-switching function built-in
• More tuning ranges than PCIII USB
• Reduces size from the PCIII USB
• Enhanced "accel pump" utility
• Made in the U.S.A.
• Easy to install

Clutch Cover

• Improves heat dissipation
• Stronger than stock
• Race proven
• Made in the U.S.A.

Clutch Cover

• Developed using the latest design, testing and manufacturing technologies to improve dependability, strength and heat dissipation
• Precision machined from billet T-6 aircraft-quality aluminum to aerospace tolerances

Water Pump Cover

• Offroad
  
  
• Made of CNC-machined billet aluminum
• Strong, lightweight and durable to provide years of outstanding protection and performance
• Designed with an impeller to increase water flow and reduce hydraulic friction and cavitation

MegaBomb Header

• The ultimate power booster
• Improved bottom to mid-range power
• Less susceptible to damage than a longer header
• Effectively reduces sound output by as much as 1.5 dB
• Runs well with sound restricting mufflers

PowerCore 4 HEX Slip-On Muffler

• Overall increase in power and torque
• Durable stainless steel and aluminum construction
• Space Age internal packing material for maximum longevity
• Internal shape of core uses Hi-Flo technology
• Enhanced sonic evacuation provides for higher flow and increased power
• Includes removable spark arrestor

Factory 4.1 RCT Slip-On Muffler

• The Factory 4.1 RCT incorporates FMF's Resonance Chamber Technology™ both internally and externally
• In addition, FMF achieves a shorter overall length that is less susceptible to crash damage and complementary to their Factory Forward Engineering
• moving the muffler closer to the motor to centralize mass
• The Factory 4.1 RCT is constructed from only aerospace grade materials that meet their exacting specifications and is manufactured 100% at their Southern California factory
• Massive Power gains throughout the RPM range.
• Huge weight savings
• RTS (Rapid Tuning System)

T-6 Slip-On Silencer

• Machined aluminum muffler bracket for increased strength and durability
• Asymmetrical muffler configuration for increased packing volume
• Removable U.S.F.S. approved spark arrestor
• TIG precision welding
• Made in the U.S.A.

Factory 4.1 RCT Exhaust System

• RCT (Resonance Chamber Technology) features a patented core shape that lowers decibels while maintaining maximum power output
• Internal ducts in the chambers of the RCT system increase internal volume for improved exhaust flow, resulting in power gains throughout the entire range of power
• FMF's Factory Forward Engineering centralizes mass and is less prone to crash damage
• Innovative rear end cap features simple installation of tuning tip inserts or spark arrestor with the removal of four screws
• Features FMF PowerBomb header
• Meet AMA and FIM sound requirements
• QuietCore 94db insert included
• Spark arrestor included in muffler
• Made in the U.S.A.

Ti-6 Pro Exhaust System

• If you are competing in a AMA Supercross or AMA Motocross series, the Ti-6 Pro Titanium Exhaust System is perfect for you
• Created as a full race system, the Ti-6 Pro is designed to increase performance and help professional racers pass AMA/FIM sound regulations

Passes AMA/FIM sound regulations.