É necessário adquirir o apoio indicado para o tipo de veículo.

Ref: RIZADAPT

Diâmetro - 22mm

Altura - 45mm

Comprimento - 725mm 

Diâmetro - 22mm Lateral e 29mm Centro

Altura - 55mm

Comprimento - 740mm

Diâmetro - 22mm

Comprimento - 119mm

RIZOMA pisca em led com função Stop Club S

• Função luz/stop traseiro e pisca num só
• Homologado
• Tecnologia LED SMD
• Em Alumínio
• Alta intensidade

RIZOMA Pisca em LED com luz de presença CLUB L

• Luz de presença branca
• Homologado
• Tecnologia LED SMD
• Em Alumínio
• Alta intensidade

• Homologado
• Tecnologia SMD LED
• Luz de Alta Intensidade
• Dimensões pequenas
• Estilo Desportivo

• Homologado
• Tecnologia SMD LED
• Luz de Alta Intensidade
• Dimensões pequenas
• Estilo Desportivo

76mm x 11.5mm

62mm x 23mm

38mm x 22,5mm

38mm x 22,5mm

Medidas:

Largura: 40cm

Altura: 28.2cm

Profundidade: 40.5cm

Acessórios opcionais:

Encosto ref: DORI40

Medidas:

Largura: 51cm

Altura: 42cm

Profundidade: 33cm

Acessórios opcionais:

Encosto ref: DORI3900

Painel superior colorido: B1B39E

Medidas:

Largura: 49.2cm

Altura: 32.5cm

Profundidade: 42.5cm

The TR48 top case is designed, engineered and made 100% in Barcelona with capacity for one helmet (Trail) or 2 helmets (Flip-up and jet). Made from hardened aluminium alloy, a stronger and lighter type of aluminium which allows a reduced cross section of 1.2mm to obtain a minimum weight with maximum resistance. AISI 304 stainless steel hinges. Includes the patented (pending) “TERRA Lock System”. With an AISI 304 industrial grade stainless Steel structure and includes mechanism and a retractable carrying handle. Designed for quick use with one hand which allows the user to open, close, mount and remove the case in just a few seconds. The keys and lock cylinder of the TR48 Keys are the new premium version from SHAD, with a system that reduces the chance of theft. And a cover that stops dust from entering. Maximum protection for your gear even from the most extreme weather conditions thanks to the waterproofness of the case and its internal foam base reduces the movement of the load inside. Requires the installation of a SHAD Top Master and a mounting plate (not included). Two options of mounting plates: SHAD standard plate (D1B481PA – new from 2020) or the new Aluminium mounting plate (D1BTRPA). More information on “How to buy your Terra cases”. The lock cylinders are easy changeable; in less than 5 minutes you can unify the top & side cases for use with one key. Third cylinder included for the top case in the right-side case. More information in "Support". Accessories (not included): Two-piece backrest (D0RI75) and expandable inner bag (X0IB47).

Acessórios compatíveis com Shad Terra TR48:

Placa de Suporte Alumínio ref: D1BTRPA

Placa de Suporte Plástica ref: D1B481PA

Encosto Duas Peças ref: D0RI75

Mala Interior Expansível ref: X0IB47

The TR37 top case is designed, engineered and made 100% in Barcelona. Made from hardened aluminium alloy, a stronger and lighter type of aluminium which allows a reduced cross section of 1.2mm to obtain a minimum weight with maximum resistance. AISI 304 stainless steel hinges. Includes the patented (pending) “TERRA Lock System”. With an AISI 304 industrial grade stainless steel structure and includes the lock mechanism and a retractable carrying handle. Designed for quick use with one hand which allows the user to open, close, mount and remove the case in just a few seconds. The keys and lock cylinder of the TR37 Keys are the new premium version from SHAD, with a system that reduces the chance of theft. And a cover that stops dust from entering. Maximum protection for your gear even from the most extreme weather conditions thanks to the waterproofness of the case and its internal foam base reduces the movement of the load inside. Requires the installation of a SHAD Top Master and a mounting plate (not included). Two options of mounting plates: SHAD standard plate (D1B481PA – new from 2020) or the new Aluminium mounting plate (D1BTRPA). More information on “How to buy your Terra cases”. The lock cylinders are easy changeable; in less than 5 minutes you can unify the top & side cases for use with one key. Third cylinder included for the top case in the right-side case. More information in "Support". Accessories (not included): Two-piece backrest (D0RI75) and expandable inner bag (X0IB47).

Acessórios compatíveis com Shad Terra TR48:

Placa de Suporte Alumínio ref: D1BTRPA

Placa de Suporte Plástica ref: D1B481PA

Encosto Duas Peças ref: D0RI75

Mala Interior Expansível ref: X0IB47

The TR47 side case is designed, engineered and made 100% in Barcelona with capacity for one helmet (Trail) or 2 helmets (Flip-up and jet). Made from hardened aluminium alloy, a stronger and lighter type of aluminium which allows a reduced cross section of 1.2mm to obtain a minimum weight with maximum resistance. AISI 304 stainless steel hinges and pegs so you can set the case on the ground without it rolling over, and ABS case guards to protect from impacts.

Includes the patented (pending) “TERRA Lock System”. With an AISI 304 industrial grade stainless Steel structure and includes the lock mechanism and a retractable carrying handle. Designed for quick use with one hand which allows the user to open, close, mount and remove the case in just a few seconds.

The keys and lock cylinder of the TR47 Keys are the new premium version from SHAD, with a system that reduces the chance of theft. And a cover that stops dust from entering. 

Maximum protection for your gear even from the most extreme weather conditions thanks to the waterproofness.

Side opening: perfect for “packing”, with large capacity and space, and an internal tray that allows you to hold your belongings, keep them tidy and prevent them from falling out when you open the suitcase. The TR47R also includes an internal mesh net that maximizes the hold of the load inside.

The Terra side cases are designed to be attached to the motorcycle through the new 4P System. It is a stainless-steel structure covered with high hardness metallic paint. Thanks to its 20mm diameter, the thickest on the market, it provides maximum strength and resistance and is also reinforced with a crossbar for the most extreme rides. More information in "How to buy your Terra cases".

The TR47 includes 3 lock cylinders and 2 keys so you can unify the locks on the 3 cases (Sides and top). The lock cylinders are easy changeable; in less than 5 minutes you can unify the top & side cases for use with one key. Third cylinder included for the top case in the right-side case. More information in "Support".

Accessories (not included): Expandable inner bag (X0IB47)."""

Las maletas laterales SH35 son más aerodinámicas y disponen de mayor capacidad de carga que la mayoría de maletas de aluminio. Con capacidad para un casco Jet, las SH35 son rígidas y ligeras gracias a su doble marco estructural, que a su vez le proporciona estanqueidad. Además disponen de bandeja interna y sujeción elástica para fijar la carga y se les puede añadir una bolsa interna perfecta para el transporte de equipaje.

Acessórios Opcionais:

Saco Interior: X0IB36

The TR36 side case is designed, engineered and made 100% in Barcelona. Made from hardened aluminium alloy, a stronger and lighter type of aluminium which allows a reduced cross section of 1.2mm to obtain a minimum weight with maximum resistance. AISI 304 stainless steel hinges and pegs so you can set the case on the ground without it rolling over, and ABS case guards to protect from impacts.

Includes the patented (pending) “TERRA Lock System”. With an AISI 304 industrial grade stainless Steel structure and includes the lock mechanism and a retractable carrying handle. Designed for quick use with one hand which allows the user to open, close, mount and remove the case in just a few seconds.

The keys and lock cylinder of the TR36 Keys are the new premium version from SHAD, with a system that reduces the chance of theft. And a cover that stops dust from entering. 

Maximum protection for your gear even from the most extreme weather conditions thanks to the waterproofness of the case.

Side opening: perfect for “packing”, with large capacity and space, and an internal tray that allows you to hold your belongings, keep them tidy and prevent them from falling out when you open the suitcase. The TR36R also includes an internal mesh net that maximizes the hold of the load inside.

The Terra side cases are designed to be attached to the motorcycle through the new 4P System. It is a stainless-steel structure covered with high hardness metallic paint. Thanks to its 20mm diameter, the thickest on the market, it provides maximum strength and resistance and is also reinforced with a crossbar for the most extreme rides. More information in "How to buy your Terra cases".

The TR36 includes 3 lock cylinders and 2 keys so you can unify the locks on the 3 cases (Sides and top). The lock cylinders are easy changeable; in less than 5 minutes you can unify the top & side cases for use with one key. Third cylinder included for the top case in the right-side case. More information in "Support".

Accessories (not included): Expandable inner bag (X0IB47).